Single Chip FM Transmitter, For Short Range Application

The FM transmitter circuit here works in the broadcast band 88 to 108MHz, and can be used to broadcast audio signals for remote listening.  The output power is around -21dBm, and the circuit operates with 3V power supply. Here is the schematic diagram of the circuit:

small fm transmitter circuit schematic diagram

If you want to carry out your portable sound system around the house, this simple FM transmitter can be applied to links your mp3 player or your home-entertainment system. For example, if you want enjoy your favorites song in the backyard while doing barbecue, you can play your CD or MP3 player in your room and broadcast with this FM transmitter. All you need in the backyard is  tuning your portable FM radio receiver to the music.  [Source: MAXIM Integrated Product Application Notes]

This entry was posted in RF and Video and tagged . Bookmark the permalink.,
Possibly Related to "Single Chip FM Transmitter, For Short Range Application" Circuits

  • Small Broadcast-Band AM Transmitter
    This AM radio circuit is a low power transmitter working on broadcast band. The simplicity is implemented using a single-transistor amplifier stage, and for the stability a crystal is used to excite the 670Hz oscillation. The output power of this … Continue reading →...
  • Two Transistors FM Transmitter
    Basically, this circuit is a radio frequency (RF) oscillator that operates around 100 MHz. The audio which is picked up and amplified by the electret microphone is fed into the audio amplifier stage built around the first transistor. Output from … Continue reading →...
  • Single Chip Two-Tones Siren
    Kids like the police or fire-brigade cars siren sound. This circuit can generate dual tone like Police or Fire-brigade cars siren sound. This circuit usually installed on battery powered cars, bicycles, and motorcycles. Not only that, but also can be … Continue reading →...
  • LM10 Thermocouple Current Loop Transmitter
    Current loop transmitter is the term associated with sensor system that is used in industrial 4-20mA current loop technology. This transmitter contain the signal conditioning circuit for the sensor (chromel-alumel thermocouple), and a current regulator to maintain the current  loop … Continue reading →...
  • Frequency Modulated Oscillator (for FM Transmitter)
    An oscillator can be built using LC (inductor-capacitor) tank circuit. When we vary the capacity of the capacitor in LC tank circuit then the frequency of the oscillator will vary according to capacitance change.  The idea of this modulator is … Continue reading →...

Comments are closed.