Fast Pulse Detector

Possibly Related to "Fast Pulse Detector" Circuits

• Open Loop Fast Peak Detector
  In this peak detector circuit, D1 is the detector diode and D2 is a level shifting or compensating diode. A load resistor RL is connected to – 5V and an identical bias resistor, RB, is used to bias the compensating … Continue reading →...
• Pulse Width Modulator Using 555 IC
  A very simple pulse modulator circuit can be built using 555 IC. In 555 chip, a special modulator input is available at pin 5. Here is the schematic diagram of circuit: This pulse modulator circuit need an external clock signal … Continue reading →...
• Pulse Position Modulator Using 555 IC
  Pulse position modulation is similar to pulse width modulation, but the frequency is not constant.  Like pulse width modulator circuit, pulse position modulator can be easily constructed using 555 IC.  Here is the schematic diagram of the circuit: If you … Continue reading →...
• Detector for Magnetic Transducer
  Magnetic transducer is usually found in pulse counting application, and we can use this circuit to amplify and convert the signal from the transducer.  Here is the schematic diagram of the signal conditioning circuit: [Source: National Semiconductor Application Note]...
• Fast Sample-And-Hold
  Sample and hold circuit is used to pick a signal and hold the level at its output, making it useful for analog digital conversion or other application where the processing need a constant level signal for the input. The circuit … Continue reading →...