Shutdown Schemes for MAX1044/ICL7660

Posted on April 11, 2010 by Rend

This is a Shutdown Schemes of MAX1044/ICL7660. Additional capacitive loading on the OSC pin of the device will reduce the oscillator frequency, so we should be aware when using the circuit. Compared with other circuits, the first circuit has the least loading on the OSC pin. Using a high or low logic level this circuit has the added advantage of controlling shutdown, depending on the orientation of the switching diode. Here is the circuit:

Shutdown Schemes circuit schematic diagram

[Source: MAXIM Application Note]

This entry was posted in Power Supply and tagged . Bookmark the permalink.,

Possibly Related to "Shutdown Schemes for MAX1044/ICL7660" Circuits

  • Cascading MAX1044/ICL7660 Voltage Doubler Devices
    This is a circuit of  Cascading Devices using MAX1044/ICL7660. This circuit can provide Larger negative multiples of the supply voltage. The resistance of first that multiplied by the quiescent current of the second, etc will reduce the output voltage. The … Continue reading →...
  • Paralleling MAX1044 Devices
    This is a circuit of Paralleling devices using MAX1044. This circuit can be used to increase current capability and reduce output resistance. In this circuit capacitor C1 is used as pump and C2 used as reservoir that serves all devices. … Continue reading →...
  • 1.5V Micropower CMOS Voltage Regulator
    The LP3992 is Micropower CMOS Voltage Regulator with input range of 1.9 to 5.2V and can produce 1.5V output. This regulator suits for application that need an accurate output voltage with power from battery, low quiescent current, low noise and … Continue reading →...
  • Positive Voltage Doubler
    This is a simple circuit of Positive Voltage Doubler. This circuit uses the MAX1044/ICL7660. The schottky diode was chosen to reduces the voltage drop. This circuit also uses MAX660 for voltage doubling or higher output currents. Here is the circuit: … Continue reading →...
  • Op-Amp Application: Voltage Comparators
    Two reasons why LM101 is well suited to comparator applications are it has a large differential input voltage range and the output is easily clamped to make it compatible with various driver and logic circuits. LM101 doesn’t have the speed … Continue reading →...

Comments are closed.