Shutdown Schemes for MAX1044/ICL7660

This is a Shutdown Schemes of MAX1044/ICL7660. Additional capacitive loading on the OSC pin of the device will reduce the oscillator frequency, so we should be aware when using the circuit. Compared with other circuits, the first circuit has the least loading on the OSC pin. Using a high or low logic level this circuit has the added advantage of […]

Read more

Paralleling MAX1044 Devices

This is a circuit of Paralleling devices using MAX1044. This circuit can be used to increase current capability and reduce output resistance. In this circuit capacitor C1 is used as pump and C2 used as reservoir that serves all devices. Here is the circuit : The output resistance is defined by following equation : Rout=Rout of MAX1044 or ICL7660s/n [Source: […]

Read more

Power Control for Arc Welding Equipment

The circuit diagram below show us a typical circuit for welding equipment. Accurate control of the maximum turn-on delay can be reached using potentiometer P2. C1 can be discharged using DB1 diode bridge and R6-R7 resistors at each line zero voltage. This will maintain the same turn-on delay and resets the voltage charge at each new half line cycle. Power […]

Read more
1 13 14 15 16 17 26