Paralleling MAX1044 Devices

Posted on April 11, 2010 by Rend

This is a circuit of Paralleling devices using MAX1044. This circuit can be used to increase current capability and reduce output resistance. In this circuit capacitor C1 is used as pump and C2 used as reservoir that serves all devices. Here is the circuit :

Paralleling devices circuit schematic diagram

The output resistance is defined by following equation :

Rout=Rout of MAX1044 or ICL7660s/n

[Source: MAXIM Application Note]

This entry was posted in Power Supply and tagged . Bookmark the permalink.,

Possibly Related to "Paralleling MAX1044 Devices" Circuits

  • Cascading MAX1044/ICL7660 Voltage Doubler Devices
    This is a circuit of  Cascading Devices using MAX1044/ICL7660. This circuit can provide Larger negative multiples of the supply voltage. The resistance of first that multiplied by the quiescent current of the second, etc will reduce the output voltage. The … Continue reading →...
  • Shutdown Schemes for MAX1044/ICL7660
    This is a Shutdown Schemes of MAX1044/ICL7660. Additional capacitive loading on the OSC pin of the device will reduce the oscillator frequency, so we should be aware when using the circuit. Compared with other circuits, the first circuit has the … Continue reading →...
  • Step-Down Charge Pump Regulator for USB Powered Devices
    this is a circuit of Step-Down Charge Pump Regulator for USB Powered Devices. The critical design parameter of this circuit is the circuit area. To solve this problem we can use Charge pump step-down circuit. This circuit only requires   the … Continue reading →...
  • Combined Positive Multiplication and Negative Voltage Conversion
    This is a Combined Positive Multiplication and Negative Voltage Conversion circuit, a popular application for MAX1044/ICL7660. Here is the circuit: This circuit can provides both negative and positive voltage. TO provide negative voltage, this circuit uses C3 and C1 which … Continue reading →...
  • Positive Voltage Doubler
    This is a simple circuit of Positive Voltage Doubler. This circuit uses the MAX1044/ICL7660. The schottky diode was chosen to reduces the voltage drop. This circuit also uses MAX660 for voltage doubling or higher output currents. Here is the circuit: … Continue reading →...

Comments are closed.